With IBM 4820-2GB with capacitive ELO touchscreen. With elegant monitor stand, IBM cash register printer. If you want to use the cash register in Germany, you will need cash register software with a TSE interface from January 1st, 2020. Our POS system (Point Of Sale) from IBM undoubtedly enables professional checkout processing. The IBM SurePOS POS system was specially developed for retail environments: Robust construction, components of the finest quality Elo touchscreen, industrial hard drive, expensive scanner, etc.And offers high reliability for fast data processing. IBM SurePOS as a compact POS workstation - just the thing for small and medium-sized companies. High reliability thanks to particularly robust components is always offered. The solution can be used as a stand-alone system or as a centrally controlled point-of-sale system. This is how it works. The SurePOS 300 meets the performance and performance requirements of trading on demand. The processor of the SurePOS 300 is clocked with 1.2 GHz and can execute many POS applications with high performance. IBM POS 32H, 4810-W2H, 1.2 GHz processor power for POS (VIA C3). 4 to 8MB graphics chip, 512MB RAM, 40GB hard disk. 4x serial ports (AD), 2x serial RS-232 ports, 2x PS / 2 ports (keyboard + mouse).
1x cash drawer - CashDrawer Port, 1x network LAN 10 / 100Mbit RJ45 port, 4x USB connector (bootable). 1x VGA DSUB SuperVGA port, 3x audio (In-Out connections) ports, 1x 220V IEC connector. 1x PCI slot internal low profile (half height), dimensions: 300 x 210 x 90mm (W x D x H).
The cash register is ready for use. We have set up the printer, scanner and cash drawer, and all cash register components have been individually tested. On the picture: Epson receipt printer.
Receipt roll, power supply unit and data cable. High quality electronically controlled cash drawer with coin and note compartments. Made entirely of steel, Mogler systems are the non plus ultra at the point of sale.
Cheater cash drawer; Steel made, highest quality; 8x coin compartments. 5x bill compartments; Security key; CashDrawer Serial connection for control.Barcode laser scanner PSC DUET R5232. This device can easily be taken from the supplied stand and used as a handheld scanner. Barcode laser scanner PSC DUET R5232; Laser scanner with 1,500 lines per second.
Dual scanning by two reading units; 0.13mm resolution. Reading distance up to 22mc; Number of lines 1: 19 lines; Number of lines 2: Individual in single beam mode. Motor control: 4,500 revolutions per minute; Serial control. Water & dust protected according to IEC529 IP53; Light source: Laser 650nm CDRH Class IIa. Readable barcodes: UPC A, E / EAN 8,13 / JAN 8, 13; EDGETM stitching for UPC A, EAN 13 & JAN.UPC P2, UPC P5, Code 128 / Code 93 / Code 39; Interleaved 2 of 5, Codabar, MSI / Plessey. Scanner dimensions: 17.8 x 8.4 x 6.6 cm; Dimensions incl. Stand: 20.3 x 10.9 x 11.6 cm; Weight: 250 gr. Checkout IBM SurePOS 300, as described, power supplies, cables. Item condition: used, is in good optical condition. POS base unit IBM SurePos. 30cm (12) touch display IBM 4820 (touchscreen monitor). Barcode laser scanner PSC Duet R5232. POS software set up as described.
This is the best there is! Capacitive touchscreens (like the iPhone) are a touchscreen variant of the.
This is because it is an electrical field that is built up over four corners and has a uniform voltage. With a finger or a conductive object changes this field and sensors can detect where the contact is taking place.The capacitive touchscreens: their conception is very different from that of the resistive monitors, although both systems have similarities. As with the models above, this technology also relies on a touch-sensitive layer on the surface of the monitor. How a capacitive touch screen works How a capacitive touch screen works In this case, the glass surface of the monitor is provided with a conductive layer, which usually consists of indium tin oxide (ITO).
This material is transparent to a very low thickness. This layer is connected to electrodes located on the edges of the monitor. In this way, a uniform electric field is created on the surface of the monitor. In other words: the surface is charged evenly. When a finger approaches this electric field, some of the charge jumps over to the finger.
This disturbance is then perceived by the control of the monitor. The ITO layer was attached to the outside of the first capacitive touchscreens. It therefore wore out quickly, which limited the life of the product. Nowadays, the algorithms for touch recognition are so advanced that a greater distance between the ITO layer and the finger is possible.The surface of the monitor now consists only of simple glass. So wear and tear is no longer an issue. The main advantage of capacitive touchscreens is the much less reduced brightness of the monitor. The low thickness of the conductive layer ensures a high level of transparency (over 90%).
They also offer excellent resolution. And the control module is particularly compact. However, they are still much more expensive than resistive touchscreens. In this case, the glass surface of the monitor is provided with a conductive layer, which usually consists of indium tin oxide (ITO).Nowadays, the algorithms for touch recognition are so advanced that a greater distance between the ITO. This item is in the category "Business, Office & Industrial\Retail & Shop Fitting\Cash Registers & Supplies"." and is located in this country: DE. This item can be shipped worldwide.